Splint/ Orthopedic Supplies
- Company Name:BL Tech Co., Ltd.
- Registration Date:2006. 09.28
- Contact:Rebecca. Nam
- Related Keywords:Orthopedic, Splint, Bone fracture, Casting tape
BL Tech Co., Ltd.
Neal Splint (Roll)
Neal Splint is applicable to the case of emergency treatment of bone fracture patient, slight fracture and sprain as well as it can be used fix or maintain on the treatment part safely.
Neal Splint drains moisture rapidly due to excellent porous after hardened and maintain superior and light stiffness for long. And it has high transmissivity when it take an X-ray and easy to remove. Neal Splint has easy elasticity when it applicable to patient and very proud mold-ability, easy and simple to use due to adhesion of finishing ends is very clean.
Neal Splint is ECO-friendly product.
Polyester product among Neal Splints can solve the environmental pollution and medical waste disposal problem due to it made by 100% POLYESTER non-woven fabric to be able to destroy by fire.
Neal Splint is dry fast.
Neal Splint drains moisture rapidly and dry fast to be able to protect the sore condition of treatment part due to it is made by using dry polyester fabric.
Neal Splint has strong stiffness.
Neal Splint is much lighter than other company product or POP and has 1.5 times stiffness more than that due to it was reinforced the stiffness of Polyurethane resin. In case of non-woven fabric splint, it can be maintained more than 80% stiffness of existing fiberglass.
|N(H)NRS-2450||2 inch x 15ft (5.0 x 450cm)|
|N(H)NRS-3450||3 inch x 15ft (7.5 x 450cm)|
|N(H)NRS-4450||4 inch x 15ft (10.0 x 450cm)|
|N(H)NRS-5450||5 inch x 15ft (12.5 x 450cm)|
|N(H)NRS-6450||6 inch x 15ft (15.0 x 450cm)|
Select the appropriate size of Neal Splint and open it.(In the case of Roll splint, seal and keep it well to avoid air and moisture penetrate into the pouch after cut off desired size
Pour the normal temperature (20°C~25°C) water into Al-pouch.
Shake it well to be evenly distributed by moisture in the Al-pouch.(Shake it well during 10~20 seconds)
Roll up and Squeeze the product then remove the rest moisture after reaction.
Hold the substrate and the pad then remove the Al-pouch only.
Put it on the affected part and wrap it in an elastic bandage then fix it.
Dabbing and getting into desired shape then the mold needs to be finished within 3 minutes after immersion in water.
It needs to be avoided excessive action within 20 minutes to be made the best stiffness after fully hardened.
Please be careful to avoid expose the pouch to sharp stuff due to the product may be harden in case of breakage of provided packaging material.(Aluminum pouch)
Neal Splint has to be storage well due to it is water-activated product which may be cause slightly change. Storage temperature of Neal Splint is 15°C~30°C. In case of exposure to the sun, storage stability may be deteriorated.
Please use it after keep Neal Splint at normal temperature in case of left it unattended at low temperature.
Other products from this supplier
Business Registry Number: 120-86-03931